Climbing Technology Anchor Cams Set 5 - 8

The Climbing Technology Anchor Cams are light alloy single axle, flexible stem, camming units or 'Friends'. Here they come as medium - large set; sizes 5-8.
Hot forged, lightweight and extremely robust cams with a classic 4 lobe design. The aluminium cam lobes spread the load, have grooved surfaces or increased holding power and give a good expansion range. The stem is a flexible single steel cable centred on the axle with a durable plastic cover to protect the stem and presewn Dyneema single sling from abrasion and forms an ergonomic thumb press. Long triggers allow for deeper placements and less finger shredding when setting and are very snug to the stem to make them less prone to tangle. They feature cam stops to allow them to be placed “passively”, useful if a cam wiggles out of its intended placement. Colour coded anodized cam and webbing stripes allow easy size location at a glance from your rack.
The 8 cams cover an expansion range covering placements sizes of 17mm-130mm. Of note there is no lighter large cam made than the CT size #8, comparing 90-130 mm range at 283 g to the BD #5, range 85.4-148.5 mm, weight 380 g. That single piece would be a huge weight saving if you need to go light. Even if these aren't your first choice they make an awesome double up set at an incredible price and weight.
Also available in small-medium size set (1 - 5) or full size set (1 - 8).
Size
Colour
Cam range min
Cam range max
kN
Weight
5
blue
47mm
70mm
15
146 g
6
lobster
58mm
84mm
15
191 g
7
titanium
68mm
100mm
15
207 g
8
red
90mm
130mm
12
283 g