Climbing Technology Anchor Cams Full Set 1 - 8

A single axle, flexible stem, camming unit set, the Climbing Technology Anchor Cams Set 1 - 8, is a complete selection of hot-forged, lightweight, and extremely durable cams that feature a classic 4 lobe design. The Anchor Cams boast alluminium lobes that help to spread the load, whilst their grooved surfaces offer superior holding power and purchase against the rock, as well as providing a good expansion range.
The Achor Cam's stem is made of a flexible single steel cable, this is centered on the cams axle with a durable plastic cover. This plastic cover simultaneously protects the cams stem and pre-sew Dyneema sling from abrasion and wear and tear.
The Anchor Cam's long triggers allow you to place the cam deeper into cracks without shredding your fingers, as well as being snug to the stem, making them far less prone to tangle. Alongside this, the Anchor Cam's arm stops allow you to place them passively and is useful if your placement wiggles out of where it was intended to sit. Colour-coded and webbing stripes provide ease of selection and location.

**Details**

**Size 1**

- Colour - Black
- Cam Range Min - 17mm
- Cam Range Max - 25mm
- KN - 5
- Weight - 95g

**Size 2**

- Colour - Grey
- Cam Range Min - 21mm
- Cam Range Max - 30mm
- KN - 10
- Weight - 109g

**Size 3**

- Colour - Orange
- Cam Range Min - 30mm
- Cam Range Max - 42mm
- KN - 15
- Weight - 119g

**Size 4**

- Colour - Green
- Cam Range Min - 38mm
- Cam Range Max - 56mm
- KN - 15
- Weight - 130g

**Size 5**

- Colour - Orange
- Cam Range Min - 47mm
- Cam Range Max - 70mm
- KN - 15
- Weight - 146g

**Size 6**

- Colour - Lobster
- Cam Range Min - 58mm
- Cam Range Max - 84mm
- KN - 15
- Weight - 191g

**Size 7**

- Colour - Titanium
- Cam Range Min - 68mm
- Cam Range Max - 100mm
- KN - 15
- Weight - 207g

**Size 8**

- Colour - Red
- Cam Range Min - 90mm
- Cam Range Max - 130mm
- KN - 12
- Weight - 283g